На новый хард wd2500ys была поставлена винда, на первичный раздел ntfs на 100 Гб, после был создан первичный на 100 Гб в ext4 и swap-раздел на 10 Гб, туда была поставлена mint15. установка прошла успешно, никаких ошибок система не выдавала, спокойно скачивала различный софт. посреди ночи по району на пару секунд отключилась подача эл.энергии, комп, ясное дело, тоже погас. после включения электричества я запустил машину, и в следующие несколько секунд ВНЕЗАПНО оказался в винде. но не сразу придав этому значение, я занялся делами винды(они были), после их окончания перезагрузил комп, но grub(если я правильно понимаю тему) перестал работать с концами - сразу же запускается винда. помогите найти ошибку или подскажите иной способ исправить ситуацию, мне не хватает ни опыта, ни времени(из-за этой гадости летит работа). все три части grub прикрепляю, данные о компе(какие есть, простите, некогда искать лучшую команду) - тоже. если подскажете консольную команду, выдающую меньший объем информации - дополню)) заранее спасибо!)
результат $ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-25-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #37-Ubuntu SMP Thu Jun 6 20:47:30 UTC 2013 (Ubuntu 3.8.0-25.37-generic 3.8.13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003fee3000-0x000000003feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003fef0000-0x000000003fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: /945 7AC Series, BIOS 6.00 PG 12/12/2005
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3fee0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 1023M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f3710-0x000f371f] mapped at [c00f3710]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c0095000] 95000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x3dfdd000-0x3fedefff]
[ 0.000000] Allocated new RAMDISK: [mem 0x35cfc000-0x37bfde52]
[ 0.000000] Move RAMDISK from [mem 0x3dfdd000-0x3fedee52] to [mem 0x35cfc000-0x37bfde52]
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x3fedffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3fedffff]
[ 0.000000] On node 0 totalpages: 261743
[ 0.000000] free_area_init_node: node 0, pgdat c18f5dc0, node_mem_map f54fb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 33244 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 2
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f54d8000 s35008 r0 d22336 u57344
[ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697
[ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/mint.seed boot=casper quiet splash -- acpi=off BOOT_IMAGE=/casper/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2094720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fee0)
[ 0.000000] Memory: 993024k/1047424k available (6253k kernel code, 53948k reserved, 2970k data, 788k init, 134024k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1903000 - 0xc19c8000 ( 788 kB)
[ 0.000000] .data : 0xc161b530 - 0xc1902100 (2970 kB)
[ 0.000000] .text : 0xc1000000 - 0xc161b530 (6253 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3391.496 MHz processor
[ 0.008001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6782.99 BogoMIPS (lpj=13565984)
[ 0.008006] pid_max: default: 32768 minimum: 301
[ 0.008043] Security Framework initialized
[ 0.008058] AppArmor: AppArmor initialized
[ 0.008061] Yama: becoming mindful.
[ 0.008125] Mount-cache hash table entries: 512
[ 0.008366] Initializing cgroup subsys cpuacct
[ 0.008371] Initializing cgroup subsys memory
[ 0.008383] Initializing cgroup subsys devices
[ 0.008385] Initializing cgroup subsys freezer
[ 0.008388] Initializing cgroup subsys blkio
[ 0.008391] Initializing cgroup subsys perf_event
[ 0.008394] Initializing cgroup subsys hugetlb
[ 0.008436] CPU: Physical Processor ID: 0
[ 0.008439] CPU: Processor Core ID: 0
[ 0.008443] mce: CPU supports 4 MCE banks
[ 0.008455] CPU0: Thermal monitoring enabled (TM1)
[ 0.008460] process: using mwait in idle threads
[ 0.008473] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.008473] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.008473] tlb_flushall_shift: 6
[ 0.008809] Freeing SMP alternatives: 24k freed
[ 0.014066] ftrace: allocating 26121 entries in 52 pages
[ 0.024119] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024189] ExtINT not setup in hardware but reported by MP table
[ 0.024521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.067245] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.40GHz (fam: 0f, model: 06, stepping: 04)
[ 0.172014] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.172025] ... version: 0
[ 0.172027] ... bit width: 40
[ 0.172029] ... generic registers: 18
[ 0.172031] ... value mask: 000000ffffffffff
[ 0.172033] ... max period: 0000007fffffffff
[ 0.172035] ... fixed-purpose events: 0
[ 0.172037] ... event mask: 000000000003ffff
[ 0.173704] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.173832] CPU 1 irqstacks, hard=f4cb8000 soft=f4cba000
[ 0.173836] smpboot: Booting Node 0, Processors #1 OK
[ 0.012000] Initializing CPU#1
[ 0.186871] Brought up 2 CPUs
[ 0.186877] smpboot: Total of 2 processors activated (13565.98 BogoMIPS)
[ 0.188147] devtmpfs: initialized
[ 0.188341] EVM: security.selinux
[ 0.188344] EVM: security.SMACK64
[ 0.188346] EVM: security.capability
[ 0.188376] PM: Registering ACPI NVS region [mem 0x3fee0000-0x3fee2fff] (12288 bytes)
[ 0.189236] regulator-dummy: no parameters
[ 0.189308] NET: Registered protocol family 16
[ 0.189514] EISA bus registered
[ 0.189710] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.189713] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[ 0.189719] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.189721] PCI: Using MMCONFIG for extended config space
[ 0.189724] PCI: Using configuration type 1 for base access
[ 0.192309] bio: create slab <bio-0> at 0
[ 0.192309] ACPI: Interpreter disabled.
[ 0.192309] vgaarb: loaded
[ 0.192309] SCSI subsystem initialized
[ 0.192323] libata version 3.00 loaded.
[ 0.192323] usbcore: registered new interface driver usbfs
[ 0.192323] usbcore: registered new interface driver hub
[ 0.192323] usbcore: registered new device driver usb
[ 0.192323] PCI: Probing PCI hardware
[ 0.192323] PCI: root bus 00: using default resources
[ 0.192323] PCI: Probing PCI hardware (bus 00)
[ 0.192323] PCI host bridge to bus 0000:00
[ 0.192323] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.192323] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.192323] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.192323] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.192323] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.192323] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.192355] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.192404] pci 0000:00:1d.0: reg 20: [io 0xff00-0xff1f]
[ 0.192444] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.192493] pci 0000:00:1d.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.192531] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.192580] pci 0000:00:1d.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.192618] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.192667] pci 0000:00:1d.3: reg 20: [io 0xfc00-0xfc1f]
[ 0.192713] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.192734] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.192822] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.192844] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.192922] pci 0000:00:1e.2: [8086:27de] type 00 class 0x040100
[ 0.192941] pci 0000:00:1e.2: reg 10: [io 0xf000-0xf0ff]
[ 0.192952] pci 0000:00:1e.2: reg 14: [io 0xfb00-0xfb3f]
[ 0.192963] pci 0000:00:1e.2: reg 18: [mem 0xfdffe000-0xfdffe1ff]
[ 0.192974] pci 0000:00:1e.2: reg 1c: [mem 0xfdffd000-0xfdffd0ff]
[ 0.193026] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.193056] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.193157] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.193170] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.193175] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f)
[ 0.193179] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000f)
[ 0.193228] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.193245] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.193257] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.193268] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.193280] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.193292] pci 0000:00:1f.1: reg 20: [io 0xf900-0xf90f]
[ 0.193336] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.193354] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
[ 0.193364] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
[ 0.193375] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
[ 0.193385] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
[ 0.193396] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf40f]
[ 0.193440] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.193458] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.193518] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.193612] pci 0000:01:00.0: [10de:0391] type 00 class 0x030000
[ 0.193627] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.193641] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193655] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.193666] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f]
[ 0.193676] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.193728] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193738] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.193743] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.193747] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.193754] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193797] pci 0000:02:03.0: [10ec:8169] type 00 class 0x020000
[ 0.193819] pci 0000:02:03.0: reg 10: [io 0xde00-0xdeff]
[ 0.193832] pci 0000:02:03.0: reg 14: [mem 0xfdeff000-0xfdeff0ff]
[ 0.193883] pci 0000:02:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.193917] pci 0000:02:03.0: supports D1 D2
[ 0.193920] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.193973] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.193979] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.193984] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.193992] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.193995] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.193999] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.194014] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 0.194404] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203412] PCI: pci_cache_line_size set to 64 bytes
[ 0.203474] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.203477] e820: reserve RAM buffer [mem 0x3fee0000-0x3fffffff]
[ 0.203594] NetLabel: Initializing
[ 0.203597] NetLabel: domain hash size = 128
[ 0.203599] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203613] NetLabel: unlabeled traffic allowed by default
[ 0.203631] hpet clockevent registered
[ 0.203631] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203631] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.205030] Switching to clocksource hpet
[ 0.214794] AppArmor: AppArmor Filesystem Enabled
[ 0.214819] pnp: PnP ACPI: disabled
[ 0.214824] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.214846] PnPBIOS: Found PnP BIOS installation structure at 0xc00fac00
[ 0.214849] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xac30, dseg 0xf0000
[ 0.214856] PNPBIOS fault.. attempting recovery.
[ 0.214858] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
[ 0.214860] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
[ 0.214862] PnPBIOS: Check with your vendor for an updated BIOS
[ 0.214864] PnPBIOS: dev_node_info: unexpected status 0x24
[ 0.214866] PnPBIOS: Unable to get node info. Aborting.
[ 0.219411] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.219417] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.219422] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.219427] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.219432] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219440] pci 0000:02:03.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.219443] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.219447] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.219454] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.219459] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.219483] pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.219494] pci 0000:00:1e.0: setting latency timer to 64
[ 0.219500] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.219504] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.219507] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.219511] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.219514] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219517] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.219521] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.219524] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.219527] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.219530] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.219570] NET: Registered protocol family 2
[ 0.219745] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.219785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.219820] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.219859] TCP: reno registered
[ 0.219864] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219875] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219938] NET: Registered protocol family 1
[ 0.219966] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.219994] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.220037] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.220062] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[ 0.220088] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.220242] pci 0000:01:00.0: Boot video device
[ 0.220249] PCI: CLS 32 bytes, default 64
[ 0.220325] Trying to unpack rootfs image as initramfs...
[ 0.973337] Freeing initrd memory: 31752k freed
[ 0.991570] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.991853] Initialise module verification
[ 0.991907] audit: initializing netlink socket (disabled)
[ 0.991925] type=2000 audit(1104548586.988:1): initialized
[ 1.017830] bounce pool size: 64 pages
[ 1.017848] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.019923] VFS: Disk quotas dquot_6.5.2
[ 1.020004] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.020807] fuse init (API version 7.20)
[ 1.020951] msgmni has been set to 1739
[ 1.021724] Key type asymmetric registered
[ 1.021727] Asymmetric key parser 'x509' registered
[ 1.021777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.021823] io scheduler noop registered
[ 1.021828] io scheduler deadline registered (default)
[ 1.021841] io scheduler cfq registered
[ 1.022034] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.022121] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.022145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.022311] isapnp: Scanning for PnP cards...
[ 1.024192] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.044597] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.065006] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.066539] Linux agpgart interface v0.103
[ 1.068451] brd: module loaded
[ 1.069320] loop: module loaded
[ 1.069470] ata_piix 0000:00:1f.1: version 2.13
[ 1.069485] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.069528] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.069866] scsi0 : ata_piix
[ 1.069950] scsi1 : ata_piix
[ 1.069995] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.069999] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.070019] ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 1.070026] ata_piix 0000:00:1f.2: MAP [
[ 1.070028] P0 P2 P1 P3 ]
[ 1.070069] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.070539] ata2: port disabled--ignoring
[ 1.070562] scsi2 : ata_piix
[ 1.070633] scsi3 : ata_piix
[ 1.070677] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 1.070681] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 1.071062] libphy: Fixed MDIO Bus: probed
[ 1.071164] tun: Universal TUN/TAP device driver, 1.6
[ 1.071166] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>;
[ 1.071234] PPP generic driver version 2.4.2
[ 1.071285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.071288] ehci-pci: EHCI PCI platform driver
[ 1.071308] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 1.071327] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.071332] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.071340] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.075247] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.075260] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 1.084038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.084076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.084081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084086] usb usb1: Product: EHCI Host Controller
[ 1.084090] usb usb1: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
[ 1.084094] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.084234] hub 1-0:1.0: USB hub found
[ 1.084241] hub 1-0:1.0: 8 ports detected
[ 1.084424] ehci-platform: EHCI generic platform driver
[ 1.084436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.084459] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.084479] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 1.084490] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.084494] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.084501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.084527] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 1.084569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.084572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084576] usb usb2: Product: UHCI Host Controller
[ 1.084578] usb usb2: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
[ 1.084581] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.084692] hub 2-0:1.0: USB hub found
[ 1.084699] hub 2-0:1.0: 2 ports detected
[ 1.084790] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 1.084800] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.084804] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.084810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.084835] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 1.084873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.084877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084880] usb usb3: Product: UHCI Host Controller
[ 1.084883] usb usb3: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
[ 1.084886] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.085002] hub 3-0:1.0: USB hub found
[ 1.085007] hub 3-0:1.0: 2 ports detected
[ 1.085107] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 1.085116] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.085120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.085127] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.085156] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 1.085193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.085197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.085200] usb usb4: Product: UHCI Host Controller
[ 1.085203] usb usb4: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
[ 1.085206] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.085311] hub 4-0:1.0: USB hub found
[ 1.085317] hub 4-0:1.0: 2 ports detected
[ 1.085407] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[ 1.085416] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.085420] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.085427] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.085460] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 1.085498] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.085501] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.085505] usb usb5: Product: UHCI Host Controller
[ 1.085508] usb usb5: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
[ 1.085510] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.085616] hub 5-0:1.0: USB hub found
[ 1.085623] hub 5-0:1.0: 2 ports detected
[ 1.085766] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.088148] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.088258] mousedev: PS/2 mouse device common for all mice
[ 1.088441] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.088469] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.089749] device-mapper: uevent: version 1.0.3
[ 1.089827] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.089850] EISA: Probing bus 0 at eisa.0
[ 1.089883] EISA: Detected 0 cards.
[ 1.089893] cpufreq-nforce2: No nForce2 chipset.
[ 1.089897] cpuidle: using governor ladder
[ 1.089899] cpuidle: using governor menu
[ 1.089903] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.089906] EFI Variables Facility v0.08 2004-May-17
[ 1.090126] ashmem: initialized
[ 1.090272] TCP: cubic registered
[ 1.090411] NET: Registered protocol family 10
[ 1.090631] NET: Registered protocol family 17
[ 1.090647] Key type dns_resolver registered
[ 1.090852] Using IPI No-Shortcut mode
[ 1.090951] Loading module verification certificates
[ 1.090972] X.509: Cert e20f7ab6198de3fe93af1d459153b337d0197de2 is not yet valid
[ 1.090976] MODSIGN: Problem loading in-kernel X.509 certificate (-129)
[ 1.090992] registered taskstats version 1
[ 1.094337] Key type trusted registered
[ 1.097236] Key type encrypted registered
[ 1.100386] rtc_cmos rtc_cmos: setting system clock to 2005-01-01 03:03:07 UTC (1104548587)
[ 1.100432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.100435] EDD information not available.
[ 1.171121] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.250012] ata1.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[ 1.264238] ata1.00: configured for UDMA/33
[ 1.281735] ata4.01: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
[ 1.281741] ata4.01: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.288479] ata4.01: configured for UDMA/133
[ 1.375571] isapnp: No Plug & Play device found
[ 1.378551] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
[ 1.380244] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.380249] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.380373] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.380442] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.380683] scsi 3:0:1:0: Direct-Access ATA WDC WD2500YS-01S 20.0 PQ: 0 ANSI: 5
[ 1.380882] sd 3:0:1:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 1.380958] sd 3:0:1:0: [sda] Write Protect is off
[ 1.380963] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.380995] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.381065] sd 3:0:1:0: Attached scsi generic sg1 type 0
[ 1.407270] sda: sda1 sda2 sda3 < sda5 >
[ 1.407719] sd 3:0:1:0: [sda] Attached SCSI disk
[ 1.407842] Freeing unused kernel memory: 788k freed
[ 1.408306] Write protecting the kernel text: 6256k
[ 1.408402] Write protecting the kernel read-only data: 2432k
[ 1.408409] NX-protecting the kernel data: 3984k
[ 1.429490] udevd[107]: starting version 175
[ 1.444041] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.504565] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 1.504912] Disabling lock debugging due to kernel taint
[ 1.506306] [drm] Initialized drm 1.1.0 20060810
[ 1.506482] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 1.507020] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 1.507829] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 1.539781] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 1.540370] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.540395] r8169 0000:02:03.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 1.540419] r8169 0000:02:03.0 (unregistered net_device): not PCI Express
[ 1.544385] r8169 0000:02:03.0 eth0: RTL8110s at 0xf840e000, 00:15:58:15:20:ab, XID 04000000 IRQ 23
[ 1.544390] r8169 0000:02:03.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.602221] usb 1-3: New USB device found, idVendor=083a, idProduct=7511
[ 1.602229] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.602235] usb 1-3: Product: 150 Mbps Wireless USB Adapter
[ 1.602239] usb 1-3: Manufacturer: AirTies Wireless Networks
[ 1.772042] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 1.933977] usb 1-6: New USB device found, idVendor=8564, idProduct=1000
[ 1.933985] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.933991] usb 1-6: Product: Mass Storage Device
[ 1.933995] usb 1-6: Manufacturer: JetFlash
[ 1.933999] usb 1-6: SerialNumber: 36NKD2KMFT77GQEZ
[ 1.988029] tsc: Refined TSC clocksource calibration: 3391.500 MHz
[ 1.988037] Switching to clocksource tsc
[ 2.044034] usb 1-8: new high-speed USB device number 5 using ehci-pci
[ 2.178480] usb 1-8: New USB device found, idVendor=058f, idProduct=6362
[ 2.178486] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.178491] usb 1-8: Product: Mass Storage Device
[ 2.178495] usb 1-8: Manufacturer: Generic
[ 2.178499] usb 1-8: SerialNumber: 058F312D81B
[ 2.183208] Initializing USB Mass Storage driver...
[ 2.184130] scsi4 : usb-storage 1-6:1.0
[ 2.184322] scsi5 : usb-storage 1-8:1.0
[ 2.184447] usbcore: registered new interface driver usb-storage
[ 2.184452] USB Mass Storage support registered.
[ 2.416034] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 2.585938] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4f
[ 2.585946] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.585951] usb 3-2: Product: USB OPTICAL MOUSE
[ 2.591491] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 2.592918] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 2.608057] usbcore: registered new interface driver usbhid
[ 2.608062] usbhid: USB HID core driver
[ 2.610618] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 2.611399] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
[ 2.611550] hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0
[ 3.184794] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.185414] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.186037] scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.186661] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.187399] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.187614] sd 5:0:0:1: Attached scsi generic sg3 type 0
[ 3.187826] sd 5:0:0:2: Attached scsi generic sg4 type 0
[ 3.188167] sd 5:0:0:3: Attached scsi generic sg5 type 0
[ 3.205023] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 3.205767] sd 5:0:0:1: [sdc] Attached SCSI removable disk
[ 3.206522] sd 5:0:0:2: [sdd] Attached SCSI removable disk
[ 3.207261] sd 5:0:0:3: [sde] Attached SCSI removable disk
[ 3.362316] scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
[ 3.363351] sd 4:0:0:0: Attached scsi generic sg6 type 0
[ 3.363909] sd 4:0:0:0: [sdf] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
[ 3.364656] sd 4:0:0:0: [sdf] Write Protect is off
[ 3.364662] sd 4:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 3.365403] sd 4:0:0:0: [sdf] No Caching mode page present
[ 3.365408] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 3.368529] sd 4:0:0:0: [sdf] No Caching mode page present
[ 3.368535] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 3.369504] sdf: sdf1
[ 3.372288] sd 4:0:0:0: [sdf] No Caching mode page present
[ 3.372294] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 3.372300] sd 4:0:0:0: [sdf] Attached SCSI removable disk
[ 3.726201] xor: automatically using best checksumming function:
[ 3.764008] pIII_sse : 4759.000 MB/sec
[ 3.764172] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 3.764912] device-mapper: dm-raid45: initialized v0.2594b
[ 4.096738] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.277682] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.279194] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 4.280181] ISOFS: changing to secondary root
[ 5.289851] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 20.909039] Adding 10004476k swap on /dev/sda5. Priority:-1 extents:1 across:10004476k
[ 21.002045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.172160] udevd[1182]: starting version 175
[ 21.778257] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 21.779776] Bluetooth: Core ver 2.16
[ 21.779806] NET: Registered protocol family 31
[ 21.779809] Bluetooth: HCI device and connection manager initialized
[ 21.779820] Bluetooth: HCI socket layer initialized
[ 21.779824] Bluetooth: L2CAP socket layer initialized
[ 21.779833] Bluetooth: SCO socket layer initialized
[ 21.783472] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 21.818199] microcode: CPU0 sig=0xf64, pf=0x4, revision=0x0
[ 21.902840] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 21.908106] Bluetooth: RFCOMM TTY layer initialized
[ 21.908121] Bluetooth: RFCOMM socket layer initialized
[ 21.908124] Bluetooth: RFCOMM ver 1.11
[ 22.142697] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.143769] intel_rng: FWH not detected
[ 22.241647] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.242061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.242065] Bluetooth: BNEP filters: protocol multicast
[ 22.242075] Bluetooth: BNEP socket layer initialized
[ 22.309443] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.309844] ACPI Exception: AE_BAD_PARAMETER, Thread 4139945168 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 22.309856] ACPI Exception: AE_BAD_PARAMETER, Thread 4139945168 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 22.309861] ACPI Exception: AE_BAD_PARAMETER, Thread 4139945168 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 22.313495] microcode: CPU1 sig=0xf64, pf=0x4, revision=0x0
[ 22.347490] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>;, Peter Oruba
[ 22.415748] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.419878] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.420678] leds_ss4200: no LED devices found
[ 22.572047] device-mapper: multipath: version 1.5.1 loaded
[ 22.679683] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 22.680559] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 22.701934] init: avahi-cups-reload main process (1375) terminated with status 1
[ 22.841778] lp: driver loaded but no devices found
[ 22.912316] ppdev: user-space parallel port driver
[ 22.965564] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[ 22.965590] parport0: irq 0 detected
[ 23.060177] lp0: using parport0 (polling).
[ 23.243515] init: failsafe main process (1354) killed by TERM signal
[ 23.256345] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 23.357370] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 23.474968] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 23.480834] snd_intel8x0 0000:00:1e.2: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 23.480868] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 23.804037] intel8x0_measure_ac97_clock: measured 53425 usecs (2575 samples)
[ 23.804043] intel8x0: clocking to 48000
[ 23.832573] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 23.845068] cfg80211: Calling CRDA to update world regulatory domain
[ 24.135146] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 24.184966] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 24.211278] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 24.221542] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 24.269529] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 24.384068] usb 1-3: reset high-speed USB device number 2 using ehci-pci
[ 24.436451] cfg80211: World regulatory domain updated:
[ 24.436457] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.436462] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.436465] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.436467] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.436470] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.436473] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.654246] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.656293] usbcore: registered new interface driver rt2800usb
[ 25.304052] init: smbd main process (1378) killed by HUP signal
[ 25.304092] init: smbd main process ended, respawning
[ 25.934157] init: udev-fallback-graphics main process (1670) terminated with status 1
[ 26.267059] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.267528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.280695] r8169 0000:02:03.0 eth0: link down
[ 26.280732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.281197] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.284031] r8169 0000:02:03.0 eth0: link down
[ 27.360896] init: alsa-restore main process (1887) terminated with status 99
[ 29.055026] init: plymouth-stop pre-start process (2453) terminated with status 1
[ 73.958545] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 114.769255] wlan0: authenticate with 00:1b:9e:f1:ec:3f
[ 114.829442] wlan0: send auth to 00:1b:9e:f1:ec:3f (try 1/3)
[ 114.832234] wlan0: authenticated
[ 114.832377] rt2800usb 1-3:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 114.832382] rt2800usb 1-3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 114.832385] rt2800usb 1-3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 114.836074] wlan0: associate with 00:1b:9e:f1:ec:3f (try 1/3)
[ 114.838246] wlan0: RX AssocResp from 00:1b:9e:f1:ec:3f (capab=0x411 status=0 aid=1)
[ 114.845240] wlan0: associated
[ 114.845254] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 160.625791] Btrfs loaded
[ 160.670543] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 160.671931] JFS: nTxBlock = 8012, nTxLock = 64099
[ 160.710095] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 160.793552] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 172.756199] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 172.756827] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 172.769232] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 172.777864] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 172.789362] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 172.802520] Request for unknown module key 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2' err -11
[ 172.802881] QNX4 filesystem 0.2.3 registered.
Выглядит для меня, трехдневного пользователя unix-систем, несколько страшновато =)
